NORAC UC5-BC-AGCO-RMC - Manual (Page 11)

11 |
If Learned Crop Height is unchecked, the operator can enter an expected crop height. The expected
crop height is then used to try and achieve a more accurate average crop height reading by excluding
ultrasonic sensor readings that are outside the acceptable distance from the expected crop height.
In most situations leaving the Learned Crop Height setting checked will provide adequate performance.
3.1.7. Sprayer Manual Boom Switches:
When a manual switch is pressed, an arrow will be displayed on the screen showing which function is
being activated.
While in Automatic Mode if either left or right tilt switches are pressed, the corresponding boom section
will go into Manual Mode. To return all boom sections to Automatic Mode, press the Auto button or
double tapping the main lift switch down.
3.2. Error Indicators
If an error is detected in the system, the Error button will appear on the screen as shown in the figures
below. The boom with the error will go to its Manual state with the ‘M’ or ‘A’ on the display flashing
depending on whether the system is in Auto or Manual mode.
Selecting the Error button allows all active system errors to be viewed. To navigate between multiple
errors, use the Next and Previous arrow buttons.