Height sensor test – results, "nr" or "no data” (not getting a valid reading), Inaccurate or erratic height reading – NORAC UC5-BC-AGCO-RMC User Manual
Page 30
Advertising
30 |
5.2.1.
Height Sensor Test – Results
5.2.1.1. "NR" or "No Data” (not getting a valid reading)
Not communicating
Dirty sensor or saturated with water
Poor target or poor mounting
Stuck in programming mode
Damaged transducer – send to NORAC for repair
5.2.1.2. “NC” or “NA” or “Lost Communication” (not communicating)
Perform a communication test
5.2.1.3. Inaccurate or Erratic Height Reading
Poor sensor mounting
Ensure the sensor is calibrated (offset) and configured
Advertising