Navigating to the uc5 options menus – NORAC UC5-BC-AGCO-RMC User Manual
Page 20
Advertising
20 |
Hold the Check button and continue holding it until you are
instructed to release it. The system will now calibrate the
hydraulics. All boom sections will move. If you accidentally
release the button, select and hold the Check button to resume.
When the setup is finished the terminal will instruct you to select
the Check button to complete the Retune.
Your NORAC UC5™ system is now configured and ready for
operation.
3.6. Navigating to the UC5 Options Menus
To navigate to the Setup screen the system must be in Manual Mode.
Select the Settings button.
Advertising