NORAC UC5-BC-AGCO-RMC - Manual (Page 25)

25 |
3.7.4. Temperature Compensation:
This feature is normally enabled (checked) to provide compensation to the UC5™ system as the
hydraulic oil changes temperature.
Disabling this feature will reduce system performance.
3.7.5. Slow Roll Reference:
This setting does not apply to Rogator Sprayers.
3.7.6. Manual Valve Drive:
Manual Valve Drive is normally defaulted off (unchecked) for most sprayer types. When enabled, this
feature will drive the corresponding valve when a switch input is detected. This feature only needs to be
enabled if the hardware installation requires it to be enabled. It should not be enabled for Rogator
Sprayers.
3.7.7. Return to Height:
When this option is enabled (checked), the main lift will move to the target height and remain there while
the UC5™ system is in Automatic Mode. After the initial Main Lift adjustments, no further adjustments
are made to the center section.