Casio DT-X5 Series - Manual (Page 23)

E-21
3 Return the main battery cover to its
original position as shown in the
illustration, and return the two main
battery pack cover lock switches to the
“LOCK” position.
When loading a large-capacity battery
pack, attach the large-capacity battery
pack cover.
• Make sure the battery pack removal
tape is bent to the inside so as not to
be pinched by the cover.
4. Use the Cradle-type Battery Charger or Cradle when charging the battery charger after
installing in the Handheld Terminal. Refer to pages 50 and 60 for information on the
charging procedure.
Turning On the Power
1. Turn on the Handheld Terminal by
holding down the power key for about
one second after waiting about 5 seconds
after installing the main battery.
Start up the application you want to run.
2 3
3
1
DT-X5_E_P18_24.p65 04.7.14, 6:02 PM 21