Casio DT-X5 Series - Manual (Page 63)

E-61
Connecting the AC Adaptor for Cradle-type Battery Charger
Use the special AC adaptor (sold separately) for the Cradle-type Battery Charger to
connect to a wall outlet.
1. After making sure that the Cradle-type
Battery Charger power switch is turned
off, plug the AC adaptor into the AC
adaptor jack on the back of the charger.
2. Next, plug the AC adaptor into a power
outlet.
3. Turn on the power. This causes the
Cradle-type Battery Charger power
indicator lamp to light in red.
4. Making sure that their power contacts
come into contact with each other, place
the Handheld Terminal onto the Cradle-
type Battery Charger. This causes the
Cradle-type Battery Charger power
indicator lamp to light in green.
When charging is initiated, Indicator 1 on
the Handheld Terminal lights up in red.
When charging has been completed,
Indicator 1 changes color from red to
green.
Important !
Take care to avoid allowing the Cradle-type Battery Charger power contacts to
become connected to each other, which creates a short.
Shorting the power contacts can damage the Cradle-type Battery Charger.
Power switch (OFF)
POWER
Power
contacts
Power switch (ON)
Power Indicator Lamp
DT-X5_E_P59_69.p65 04.7.14, 6:05 PM 61