Casio DT-X5 Series - Manual (Page 42)

E-40
Adjusting Laser Emission Width
(DT-X5M10/DT-X5M10R only)
This Handheld Terminal is able to adjust the emission width of laser light. Adjust the
Handheld Terminal by following the procedure described below when the emission
width of the laser light has become off the proper emission width.
1. Press the reset switch on the back of the Handheld
Terminal to initiate the Top menu.
2. Press the keys in the order of the “2” key (Setting), “1”
key (Scanner setting) and then “4” key (OBR
calibration) to initiate the emission width adjustment
function.
3. Press the trigger key to emit laser light, and shine the
light on the emission width adjustment bar code.
• Align the laser light with the narrow bars on both
sides.
DT-X5_E_P36_48.p65 04.7.27, 3:30 PM 40