Casio DT-X5 Series - Manual (Page 35)

E-33
1 2
2
1
1
Installation Procedure
When using AA size alkaline batteries, install the alkaline battery holder according to the
following procedure.
1. Make sure the Handheld Terminal is turned off. If the power is on, press the power
key to turn it off.
2. Turn over the Handheld Terminal.
3. Slide the two main battery cover lock
switches on both sides of the Handheld
Terminal to the “FREE” position, and
remove the main battery cover.
If the battery pack is installed, remove the
battery pack by referring to step 4
describing “To replace the battery pack”
on page 30.
4. Install the alkaline battery holder as
shown in the illustration.
Fold the battery pack removal tape so that
it is beneath the alkaline battery holder.
DT-X5_E_P27_35.p65 04.7.14, 6:03 PM 33