Casio DT-X5 Series - Manual (Page 32)

E-30
Replacing the Battery
4. Remove the battery pack by pulling up on
the battery pack removal tape.
5. Install a charged battery pack in the
Handheld Terminal.
• Take care to ensure it is oriented
correctly.
• Install the battery pack so that the
battery pack removal tape is on top of
the battery pack.
1
6. Return the main battery cover to its
original position as shown in the
illustration, and return the two main
battery pack cover lock switches to the
“LOCK” position.
• Make sure the battery pack removal
tape is bent to the inside so as not to be
pinched by the main battery cover.
2 3
3
1
2
DT-X5_E_P27_35.p65 04.7.14, 6:03 PM 30