Casio DT-X5 Series - Manual (Page 64)

E-62
Using Wall Mount Unit
To wall mount the Cradle-type Battery Charger, use the same procedure as that described
for the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO) on page
55.
Removing the Fall Protector
The procedure is the same as that for the Bridge Satellite Cradle (HA-61IO)/Bridge
Basic Cradle (HA-A60IO). Refer to page 53.
Cradle-type Battery Charger (HA-A30CHG) Specifications
1. Charging
Charging System: Fixed-voltage (with current limiter)
Charge Time: Approximately 5 hours (HA-A20BAT battery pack)
Approximately 10 hours (DT-5025LBAT large-capacity battery pack)
2. Power Supply
Power Requirement: AC adaptor (AD-S42120A)
Power Consumption: 12V DC, approximately 0.9A
Output to Handheld Terminal: 5V DC 1.5A (max.)
3. AC Adaptor
Model: AD-S42120A
Input: 100V to 240V AC 50/60Hz
Output: 12V DC 3.5A
4. Dimensions and Weight
Dimensions: Desktop: Approximately 110(W) X 125(D) X 128(H) mm
(4 3 ⁄
8
"W × 4 15 ⁄
16
"D × 5 1 ⁄
16
"H)
Wall Mount: Approximately 110(W) × 148(D) × 153(H) mm
(4 3 ⁄
8
"W × 5 7 ⁄
8
"D × 6"H)
Weight: Desktop: Approximately 510g (16.6oz)
Wall Mount: Approximately 600g (22.2oz)
5. Operating Environment
Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 30% to 80% RH (non-condensation)
Using the Cradle-type Battery Charger
DT-X5_E_P59_69.p65 04.7.27, 3:31 PM 62