Casio DT-X5 Series - Manual (Page 54)

E-52
Using the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO)
5. Making sure that their two IR ports come into contact with each other, place the
Handheld Terminal onto the Bridge Satellite Cradle. This causes the Bridge Satellite
Cradle power indicator lamp to light in green.
• If the system is operating normally and the communication is enabled, the system
status indicator lamp lights in green.
• The communication indicator lamp flashes in green when the communication starts.
When charging is initiated, Indicator 1 on the Handheld Terminal lights up in red. When
charging has been completed, Indicator 1 on the Handheld Terminal changes color from
red to green.
Important!
• A high-sensitivity communication element is used during IR communication.
In order to ensure successful communication, avoid using cellular phones or other
devices that emit radio wave in the area where you are performing IR
communication.
If you need to use such a device, move away from the communicating Handheld
Terminals. In case of a cellular phone, keep it at least 30cm (
11 7 77 77 ⁄⁄⁄⁄⁄
8 88 88
" ) away.
• Take care to avoid allowing the Bridge Satellite Cradle/Bridge Basic Cradle
power contacts to become connected to each other, which creates a short.
Shorting the power contacts can damage the Bridge Satellite Cradle/Bridge Basic
Cradle.
DT-X5_E_P49_58.p65 04.7.14, 6:05 PM 52