Casio DT-X5 Series - Manual (Page 57)

E-55
Using Wall Mount Unit
The following procedure explains how to use the optional wall mount unit (DT-891WH)
to configure the Bridge Satellite Cradle/Bridge Basic Cradle for a wall-mounted
configuration.
Important!
When mounting on a wall, always make sure to attach the Fall Protector.
1. Remove the screws on the bottom of the
Bridge Satellite Cradle/Bridge Basic
Cradle, and remove the desktop unit.
2. Affix the wall mount unit to the bottom of
the Bridge Satellite Cradle/Bridge Basic
Cradle, and secure it in place with the wall
mount unit screws.
3. Drive one of the provided screws into the
wall at the location where the upper hole
of the wall mount unit to be when you
mount the unit on the wall.
Do not drive the screw into the wall all the
way. Keep a space of about 2mm (
1 /
8
" )
between the head of the screw and the
wall surface.
Screws
Screws
2mm ( 1 /
8
" )
DT-X5_E_P49_58.p65 04.7.27, 3:31 PM 55