Casio DT-X5 Series - Manual (Page 8)

E-6
Safety Precautions
Caution
• Promptly remove worn out batteries from the Handheld Terminal. Allowing
worn out batteries to remain installed in the Handheld Terminal for a long
period of time results in the risk of the generation of gas from the batteries
causing the batteries to leak fluid, overheat or rupture.
• Remove the batteries from the Handheld Terminal when not using for a long
period of time. Failure to do so results in the risk of the generation of gas
from the batteries causing the batteries to leak fluid and damage the
Handheld Terminal.
• Do not attempt to solder the batteries directly. This results in the risk of heat
damaging the insulation and safety valve causing the batteries to leak fluid,
overheat or rupture.
• Do not use or place the batteries in a location subject to high temperatures
such as locations of intense direct sunlight or in an automobile on a hot day.
This results in the risk of the batteries leaking fluid, overheating or
rupturing.
• Insulate the ends of the batteries by covering with tape and so on when
storing or disposing. Allowing the batteries to contact other batteries or
metal objects results in the risk of the batteries leaking fluid, overheating or
rupturing.
• Do not allow the batteries to become wet. This results in the risk of the
batteries overheating.
• Avoid storing batteries in locations subject to direct sunlight, high
temperature or high humidity. This results in the risk of the batteries leaking
fluid. In addition, there is also the risk of reduced battery performance and
shorter battery life.
• Although these batteries may be disposed of in the same manner as ordinary
non-burnable garbage, please dispose of them in the proper manner in
accordance with the rules and regulations of your local community when
applicable.
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM 6