Casio DT-X5 Series - Manual (Page 34)

E-32
Removing and Installing the Alkaline Battery
Holder (DT-X5M10E/DT-X5M30E/DT-X5M30U only)
Removal Procedure
When using a battery pack, first remove the alkaline battery holder according to the
following procedure.
1. Make sure the Handheld Terminal is turned off. If the power is on, press the power
key to turn it off.
2. Turn over the Handheld Terminal.
3. Slide the two main battery cover lock
switches on both sides of the Handheld
Terminal to the “FREE” position, and
remove the main battery cover.
If the AA size alkaline batteries are
installed, remove the batteries by referring
to step 4 on page 28 describing “Replacing
the AA size Alkaline Batteries”.
4. Remove the alkaline battery holder by
holding the portion indicated by the circle
(
™
) in the illustration while pushing the
tab on the outer frame of the alkaline
battery holder to the inside.
2
1
1
1
2
DT-X5_E_P27_35.p65 04.7.14, 6:03 PM 32