Eclipse Combustion 6500 - Manual (Page 33)

Eclipse Bi-Flame v1.8, Instruction Manual 826, 05/03
33
Yearly Checklist
1 . Test (leak test) safety shut-off valves for tightness of closure.
2 . Test pressure switch settings by checking switch movements against pressure
setting and comparing with actual impulse pressure.
3 . Visually check ignition cable and connectors.
4 . Make sure that the following components are not damaged or distorted:
• the burner nozzle
• the spark plugs
• the flame sensors
• the flame tube or combustion block of the burner