PRG S400 User Manual 3.1 - Manual (Page 10)

4 PRG SERIES 400 ® POWER AND DATA DISTRIBUTION SYSTEM USER MANUAL
DESCRIPTION
Overview
The standard V676 Console consists of a Rolling Rack unit, up to six 3U Breaker Modules, and associated Breakout
Boxes connected by Trunk Cables. The rack is designed to distribute house power service and control signals for the
purpose of operating automated luminaires or other remote devices up to 500 feet away.
Optional components include the Front of House (FOH) Breaker and Breakout Modules, which provides a convenient
method of connecting consoles and accessories at the mix riser position. The FOH Breaker Module sources two sets
of six 15-Amp circuits of AC line power and provides system control data inputs for up to 10 USITT DMX512
universes along with inputs for two 10/100BaseT Ethernet signals at the associated FOH Breakout Module.
The FOH A/B Switch is connected to the FOH Breakout Module and can be used to input and track multiple DMX512
universes. The Trunk DC Adapter can be used to power the internal circuit boards in all versions of the FOH Breakout
Modules. This will enable multiple DMX512 Universes to be converted to Ethernet outputs.
Note: Refer to "Controls and Indicators" on page 13 for more specifics on component operation.
Figure 1-1: Series 400 Rack Components Overview
Rolling Rack
Breaker Module
Breakout Box
LED Meter Module
Trunk Cable
Front of House
Breakout Module
EXAMPLE CONFIGURATION
S400 Rack Components May Vary
Front of House
Breaker Module
Front of House A/B Switch
Trunk DC Adapter