PRG S400 User Manual 3.1 - Manual (Page 27)

PRG SERIES 400 ® POWER AND DATA DISTRIBUTION SYSTEM USER MANUAL 21
10-Port Ethernet Switch
The PRG Series 400 10-Port Ethernet Switch provides a powerful and convenient interface between Virtuoso® or
DMX512 control consoles and their control equipment. The 10-Port Ethernet Switch offers two types of connections:
isolated copper Ethernet ports and fiber optic ports. The fiber optic ports provide the ability to send fast and reliable
information up to 2 kilometers away without the need for repeaters using Virtuoso Fiber Optic Cable. The copper
Ethernet connections offer the ability to combine standard copper connections with fiber optic transmissions.
Note :
Copper connections are limited to a maximum distance of 300 feet.
The 10-Port Ethernet Switch automatically determines the speed of each network connection based on the
equipment connected to the switch and supports multiple connections with transmission and reception occurring
simultaneously.
The following illustrations provide a detailed description of Series 400 10-Port Ethernet Switch connections, controls
and indicators.
Figure 1-17: 10-Port Ethernet Switch Front Panel
Figure 1-18: 10-Port Ethernet Switch Rear Panel
DC Power Indicator -
indicates AC power is applied.
Ethernet LEDs -
indicates valid Ethernet
link, transmit and receive
for each connection when lit.
10/100 Base T Connections -
input/output ports for standard signals.
Fiber Data LEDs -
indicates valid Fiber
link, transmit and receive
for each connection when lit.
Fiber Optic Input -
ports for fiber optic
cables with input
Fiber Optic Output -
port for a fiber optic
cable with an output
connector.
connectors.
Neutrik Connector -
Allows connection of AC Line Cord 208V PowerCon Cable (supplied).