StarTech.com SV1108IPPWEU - Manual (Page 12)

Instruction Manual
5
Components
Front View
No. Component Description
1 LAN Port
The Cat 5e cable that connects the SV1108IPEXT/POW to
the LAN, WAN, or Internet plugs in here.
2
Firmware
Upgrade/
Reset Switch
1. Pressing and releasing this switch performs a
SV1108IPEXT/POW system reset.
2. Pressing and holding this switch for more than three
seconds returns the SV1108IPEXT/POW to its factory default
configuration settings.
3. Pressing and holding this switch while powering on the
switch returns the SV1108IPEXT/POW to its factory default
firmware level. This operation should only be performed in
the event of a firmware upgrade failure that results in the
device becoming inoperable.
NOTE: This switch is recessed and must be pushed with a
thin object - such as the end of a paper clip, or a
ballpoint pen.
3
10/100 Mbps
LED
The LED lights ORANGE to indicate 10 Mbps data
transmission speed. It lights GREEN to indicate 100 Mbps
data transmission speed.
4 Link LED
Flashes GREEN to indicate that a Client program is accessing
the device.
5 Power LED
Lights ORANGE when the SV1108IPEXT/POW is powered up
and ready to operate.
6
Power Outlet
LED
Lights ORANGE when the server attached to the
SV1108IPPOW’s power outlet is powered on
(SV1108IPPOW only)
1 2 3 4 5