StarTech.com SV1108IPPWEU - Manual (Page 51)

Instruction Manual
44
Item Action
Enable Authorization
Select whether to enable Enable
Authorization, or not.
1. If enabled (the box is checked), the
LDAP / LDAPS server directly returns a
‘permission’ attribute and authorization
for the user that is logging in. With this
selection the LDAP schema must
be extended.
2. If not enabled (no check in the box),
the result the server returns indicates
whether the user that is logging in
belongs to the ‘SV1108IPEXT/POW
Admin Group’. If the result is ‘yes’ the
user has full access rights; if the result is
‘no’, the user only has limited
access rights.
NOTE: Consult the LDAP / LDAPS
administrator to ascertain whether
to enable the Enable Authorization
function, or not.
LDAP Server IP and Port
Fill in the IP address and port number for
the LDAP or LDAPS server. For LDAP, the
default port number is 389; for LDAPS,
the default port number is 636.
Timeout
Set the time in seconds that the
SV1108IPEXT/POW waits for an LDAP or
LDAPS server reply before it times out.
LDAP Administrator DN
Consult the LDAP / LDAPS administrator
to ascertain the appropriate entry for
this field. For example, the entry might
look like this:
kn=LDAPAdmin,ou=SV1108IPPOW,dc=
aten,dc=com
LDAP Administrator Password
Key in the LDAP administrator’s
password.