StarTech.com SV1108IPPWEU - Manual (Page 45)

Instruction Manual
38
Log Server
Important transactions that occur on the SV1108IPEXT/POW, such as logins and
internal status messages, are kept in an automatically generated log file
Specify the MAC address of the computer that the Log Server runs on in the MAC
address field.
Specify the port used by the computer that the Log Server runs on to listen for log
details in the Port field. The valid port range is 1–65535. The default port number
is 9001.
NOTE: The port number must different than the one used for the Program port
SNMP Server
To be notified of SNMP trap events, do the following:
1. Check Enable SNMP Agent.
2. Key in the IP address and the port number of the computer to be notified of SNMP
trap events. The valid port range is 1-65535.
NOTE: The following SNMP trap events are sent: System Power On, Login Failure, and
System Reset.