StarTech.com SV1108IPPWEU - Manual (Page 165)

Instruction Manual
158
PPP Modem Operation
Basic Setup
In addition to the browser and AP methods, the SV1108IPEXT/POW can also be
accessed through its RS-232 port using a PPP dial-in connection, as follows:
1. Set up your hardware configuration to match the diagram, below:
2. From your computer, use your modem terminal program to dial into the
SV1108IPEXT/POW’s modem.
NOTE:
1. If you don’t know the SV1108IPEXT/POW modem’s serial parameters, get them
from the SV1108IPEXT/POW administrator.
2. An example of setting up a modem terminal program under Windows XP is
provided on the next page.
3. Once the connection is established, open your browser, and specify
192.168.0.60 in the URL box.
From here, operation is the same as if you had logged in from a browser or with the
AP programs.