StarTech.com SV1108IPPWEU - Manual (Page 159)

Instruction Manual
152
IP Address Determination
If you are an administrator logging in for the first time, you will need to access the
SV1108IPEXT/POW in order to give it an IP address that users can connect to. There
are three methods to choose from. In each case, your computer must be on the same
network segment as the SV1108IPEXT/POW. After you have connected and logged in
you can enter its fixed network address.
IP Installer
For computers running Windows, an IP address can be assigned with the IP
Installer utility:
1. On the Software CD that came with your SV1108IPEXT/POW package, go to the
directory that the IPInstaller program resides in, and run IPInstaller.exe. A dialog box
similar to the one below appears:
2. Select your device in the Device List.
NOTE:
1. If the list is empty, or your device doesn’t appear, click Enumerate to refresh the
Device List.
2. If there is more than one device in the list, use the MAC address to pick the one you
want. The SV1108IPEXT/POW’s MAC address is located on its bottom panel.
SV1108IPEXT