StarTech.com SV1108IPPWEU - Manual (Page 161)

Instruction Manual
154
IPv6
At present, the SV1108IPEXT/POW supports two IPv6 address protocols: Link Local IPv6
Address, and IPv6 Stateless Autoconfiguration
Link Local IPv6 Address
At power on, the SV1108IPEXT/POW is automatically configured with a Link Local
IPv6 Address (for example, fe80::210:74ff:fe61:1ef). To find out what the Link Local
IPv6 Address is, log in with the SV1108IPEXT/POW’s IPv4 address and click the Device
Information icon. The address is displayed at the bottom of the Device Information
page (see page 32).
Once you have determined what the IPv6 address is, you can use it when logging in
from a browser or the Win and Java Client AP programs.
For Example:
If you are logging in from a browser, you would key in
http://[fe80::2001:74ff:fe6e:59%5] for the URL bar.
If you are logging in with the AP program, you would key:
fe80::2001:74ff:fe6e:59%5
for the IP field of the Server panel (see The Windows Client Connection Screen,
page 132).
NOTE:
1. To log in with the Link Local IPv6 Address, the client computer must be on the same
local network segment as the SV1108IPEXT/POW
2. The %5 is the %interface used by the client computer. To see your client computer’s
IPv6 address: from the command line issue the following command: ipconfig /all.
The % value appears at the end of the IPv6 address.