StarTech.com SV1108IPPWEU - Manual (Page 74)

Instruction Manual
67
An explanation of the Customization parameters is given in the table below:
Parameter Explanation
Timeout
If there is no user input for the amount of time
specified here, the user is automatically logged out,
and must log in again before the SV1108IPEXT/POW
can be accessed. The default is 3 minutes.
Working Mode
Enable ICMP
If ICMP is enabled, the
SV1108IPEXT/POW can
be pinged. If it is not
enabled, the device
cannot be pinged. The
default is Enabled.
Enable Device List
If this item is enabled, the
device will show up in the
list of local SV1108IPEXT/
POW units on the AP
Client Connection screen.
If it is not enabled, it will
not show up. The default
is Enabled,
Enable Multiuser
Enabling Multiuser
operation permits more
than one user to log into
the SV1108IPEXT/POW
at the same time. The
default is Enabled,
Force All to Grayscale
If Force All to Grayscale
is enabled, the remote
display for all users is
changed to grayscale.
This can speed up I/O
transfer in low bandwidth
situations. The default
is Disabled.