Toa FS-7000 SERIES Manual - Manual (Page 11)

11
5.2. FS-7010CP Expansion Control Panel
The FS-7010CP is used to expand the broadcasting capacity of FS-7000 Series Voice Evacuation Systems.
Announcements and background music can be broadcast to up to 10 individual zones. Connecting the FS-
7000GM to the FS-7000CP/FS-7010CP combination permits broadcasts to be made to up to 20 zone groups.
[Front]
2 3 4 1
1. Power Indicator
Lights when power is supplied and the FS-
7010CP is ready for operation.
2. Zone Selector Keys
Press these keys to select broadcast zones. To
cancel the selection, press the keys again.
Multiple broadcast zones can be selected
simultaneously with the additional use of the FS-
7000GM.
3. Zone Indicators
Light to indicate current broadcast zones.
Note
These indicators also light during emergency
broadcasts when their corresponding zones are
selected by automatic fire alarm signals.
4. Broadcast Zone Fill-In Space
Write the names of zones to be selected with the
Zone Selector keys (2) in this space.
5.3. FS-7000JP Junction Panel
The FS-7000JP panel is used in conjunction with the FS-7000CP and the FS-7010CP to connect speaker
lines in FS-7000 Series Voice Evacuation Systems. It can connect up to 10 speaker lines. If speaker lines are
shorted, the line protection fuses disconnect the shorted lines, leaving broadcasts to other speaker lines
functioning intact. The FS-7000JP is equipped with BGM input and priority broadcast input, with BGM
broadcast zones selectable using the keys on the front panel. Priority broadcast zones are selected using the
FS-7000CP.
[Front]
4 1 2 3
1. Power Indicator
Lights when power is supplied and the FS-7000JP
panel is ready for operation.
2. BGM Zone Selector Keys
Press these keys to select BGM broadcast zones.
Press the keys again to cancel the selection. (2-
channel broadcast)
3. Speaker Line Indicators
Indicate speaker line operating statuses as
follows:
Green:
BGM broadcast in progress (2-channel
broadcast)
Orange: BGM broadcast in progress (1-channel
broadcast) or priority or emergency
broadcasts in progress
Red: Short-circuit (see page 30.)
4. Broadcast Zone Fill-In Space
Write the names of zones to be selected with the
BGM Zone Selector keys (2) in this space.