Toa FS-7000 SERIES Manual - Manual (Page 29)

29
8.3. Making BGM Broadcasts
The operating panel used will differ depending on whether the system is set to 1-channel or 2-channel
broadcast mode.
Note
Use the Output mode selector switch on the rear of the FS-7000CP to switch between 1-channel and 2-
channel broadcast mode.
[Buttons and keys used for operation]
[FS-7000CP]
[FS-7010CP]
[FS-7000JP]
Zone Selector Keys Zone Indicators
All-Zone Call
Indicator All-Zone Call
Button
Zone Selector Keys Zone Indicators
Speaker Line Indicators BGM Zone Selector Keys
8.3.1. When using 1-channel broadcasting
Press the appropriate Zone selector keys or All-zone call button on the FS-7000CP or FS-7010CP to
select the desired broadcast areas, then commence music play from the BGM device.
The appropriate Zone indicators or All-zone call indicator will illuminate.
8.3.2. When using 2-channel broadcasting
Press the appropriate BGM Zone selector keys on the FS-7000JP to select the desired broadcast
areas, then commence music play from the BGM device.
The appropriate Zone indicators will illuminate.