Toa FS-7000 SERIES Manual User Manual
Page 26
26
7.3.2. Checking Recorded Content
Connect headphones to the Headphone terminal.
Step 1. Set the Mode selector switch to "MONITOR."
The Evacuation announcement indicator and False alarm announcement indicator will begin to flash.
Step 2. Press the appropriate Evacuation announcement button or False alarm announcement button to listen
to the recorded content.
The flashing of the Evacuation announcement indicator or False alarm announcement indicator will
change to continuous illumination and playback of the recording will begin.
Note
Changing the Mode selector switch to another position during recording playback will terminate
playback. Also, note that the recording being played back will only be audible through the
headphones, and will not be output through the broadcast output terminal.
Step 3. To stop playback of the recording, press the same button (Evacuation announcement button or False
alarm announcement button) again.
The Evacuation announcement indicator and False alarm announcement indicator will begin to flash.
Step 4. Once monitoring is finished, reset the Mode selector switch to "NORMAL."
The Evacuation announcement indicator and False alarm announcement indicator will extinguish.