Toa FS-7000 SERIES Manual - Manual (Page 19)

19
[Announcements from the FS-7000RM (with the FS-7000RF and FS-7000RM installed)]
Microphone announcements can be made to specific areas selected using the Zone Selector Keys on the FS-
7000RM or FS-7010RM. Also, pressing the Chime Key on the remote microphone before making the
announcement causes the FS-7000CP's 4-tone chime to sound.
[Microphone announcements from the FS-7000CP]
Microphone announcements can be made to specific areas selected using the Zone Selector Keys on the FS-
7000CP or FS-7010CP. Also, pressing the Chime Button on the FS-7000CP before making the
announcement causes the 4-tone chime to sound. Microphone announcements are broadcast after they have
been mixed with signals from the sound source equipment connected to the Auxiliary Input on the rear of the
FS-7000CP.
[BGM Broadcasts]
For systems equipped with a 2-channel power amplifier and capable of 2-channel broadcasting, the BGM
Zone Selector Keys on the FS-7000JP may be used to select broadcast areas, allowing broadcasts from the
music play component connected to the FS-7000CP's BGM input.
For systems equipped with a 1-channel power amplifier and capable of 1-channel broadcasting, the BGM
broadcast areas can be selected at the FS-7000CP or FS-7010CP.
6.2.2. BGM Broadcasts & Priority Broadcasts
If a priority broadcast is made to an area in which BGM broadcasting is in progress, the BGM broadcast is
interrupted and changed to the priority broadcast. Once the priority broadcast has finished, the original BGM
broadcast resumes immediately.
[Broadcasting to areas in which BGM broadcasting is in progress]
2-Channel Broadcasting
Priority broadcast start Priority broadcast end
BGM broadcast Priority broadcast BGM broadcast
Priority broadcast start Priority broadcast end
BGM broadcast Priority broadcast BGM broadcast
Broadcast start Broadcast end
BGM broadcast BGM broadcast
Microphone announcement
or chime play
[Broadcasts from sources other than the FS-7000CP]
The BGM broadcast is interrupted and changed to the priority broadcast. Once the priority broadcast has
finished, the original BGM broadcast resumes gradually.
1-Channel Broadcasting
[Broadcasts from the FS-7000CP]
The BGM broadcast is interrupted by microphone announcement or chime play and changed to the priority
broadcast. Once the priority broadcast has finished, the original BGM broadcast resumes gradually.