Toa FS-7000 SERIES Manual - Manual (Page 34)

34
11.3. FS-7000JP Junction Panel
24 V DC, M3 screw terminal, distance between barriers: 6.4 mm
450 mA
Priority input: 100 V line: Max. 1200 W, M4 screw terminal,
distance between barriers: 9 mm
BGM input: 100 V line: Max. 1200 W, M4 screw terminal,
distance between barriers: 9 mm
10 lines each for H and C, M3 screw terminal, distance between barriers: 6.4 mm
(100 V line, Max. 280 W for FS-7006PA, Max. 500 W per line for FS-7012PA)
ø5 mm tubed fuse 0.5 A x 10 fuses preinstalled
(Fuse capacity must be changed depending on the load capacity.)
General urgency/Emergency mode output terminal:
Open collector output, rated voltage: 30 V DC, current capacity: 0.1 A,
removable terminal block (2 pins)
Power remote output terminal:
Relay contact output, rated voltage: 30 V DC, current capacity: 1 A,
removable terminal block (2 pins)
BGM zone selection keys
Power indicator, Speaker line indicators (Green: BGM in progress (2-channel
broadcast mode)/ Orange: BGM in progress (1-channel broadcast mode),
priority broadcast, and emergency broadcast/ Red: short-circuit)
0°C to +40°C
Under 90% RH (no condensation)
Panel: Aluminum, black, alumite
482 (w) x 88.4 (h) x 340.7 (d) mm
4.2 kg
Power Source
Current Consumption
Power Amplifier Input
Speaker Output
Line Short-Circuit
Protection
External Control
Onput
Operating Section
Display Section
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Fuse (0.5 A) ............................................... 2
Connection cable (10 pins, 2.5 m) ............. 1 Connection cable (4 pins, 2.5 m) ............... 1
Removable terminal plug (2 pins) .............. 2