Toa M-9000M2 CE-AU - Manual (Page 30)

30
6.5.1. Delay time settings
Step 1. Set the required delay time values using the "DELAY TIME" pull-down menu.
The delay time interval can be set within the range of 0 - 40 ms in 1 ms units.
A combined total of up to 40 ms can be set for both output channels 1 and 2. When the T-001 module
is used, up to 40 ms can be set for output channels 3 and 4, 5 and 6, or 7 and 8, combined.
For example, set the delay time of output channel 2 to "10" or less if output channel 1 is set for "30." If
channel 2 is set for a delay time exceeding "10," the set value of channel 1 is automatically changed
so that the total value of both channels combined equals 40.