Toa M-9000M2 CE-AU - Manual (Page 50)

50
[When "ZM-9001" is selected:]
Using the combo box, select the functions to be assigned to input terminals ZM-IN1 - ZM-IN6, then
select parameters from the selected functions.
[When "ZM-9002" is selected:]
Select the functions to be assigned to input terminals ZM-IN1 - ZM-IN4 from the combo box. Using
the combo box, select parameters from the selected functions, then designate the channels to be
assigned to VOLUME.
All settings are completed. Click the "NEXT" button to advance to the following wizard.
[When "REMOTE VOLUME" is selected:]
In the "VOLUME" combo box, designate which input or output channel volume to be remotely
operated.