Toa M-9000M2 CE-AU - Manual (Page 60)

60
9.2. Downloading Setting Data from the Amplifier
Confirm that communications are possible between the amplifier and the PC, then select "Download 9000 To
PC..." from the pull-down menu.
A progress bar is displayed during communications.
If communication is completed, the progress bar dialog is closed and downloading is completed.
Note
When an error is detected, the error indication is displayed, returning the setting to the initial value.
Clicking "FINISH" after setting completion completes the communication settings. To abort the settings, click
"CANCEL," and the communication settings are cancelled.
If the Auto Mode is selected, each connection is checked in sequence, taking a little time to ensure that each
connection is correctly established.
It is recommended that the baud rate be set to 11,520 bps.
Shown below is the last wizard screen.