Toa M-9000M2 CE-AU - Manual (Page 55)

55
7.8.2. ZM-9012 Remote controller settings
When two or more ZM-9011, ZM-9012, ZM-9013 or ZM-9014 Remote Controllers are connected, they are
displayed on the wizard screen in ascending order. Perform settings for each unit.
Step 1. Select either Input or Output in the Input / Output Settings.
Step 2. Check the channel to be assigned to the volume knob at "ASSIGNED CH."
Step 3. Check the channel to be displayed on the volume level at "ASSIGNED VOL LED."
Step 4. Click "NEXT" to move to the next page .
Setting address
The number of currently set units / the number of connected units
Input / Output
Settings