Toa M-9000M2 CE-AU - Manual (Page 5)

5
2. INSTALLATION
Be sure to exit all currently running applications before beginning installation of the software. Follow the
procedure below to install.
Step 1. Open the "ProgrammingSoftware" folder located in the Software folder contained on the supplied CD-
ROM, then double-click "Setup9000M2.msi" in the opened folder.
If ".NET Framework" has not been installed in the PC, the following screen is displayed. In such
cases, follow the instructions on the screen to install ".NET Framework."
The 9000M2 Series programming software installer starts when installation of ".NET Framework" is
completed or if ".NET Framework" is already installed on the PC.