Toa M-9000M2 CE-AU - Manual (Page 36)

36
[SAVE Procedure]
Step 1. Click the Scene Number selection button to display scene number groups 1 - 16 or 17 - 32.
Step 2. Click the scene number to be saved to select.
Step 3. When changing the scene name, be sure to enter a new name. (Up to 7 characters)
Step 4. Click the "SAVE" button in the Scene Memory Operation button.
[DELETE Procedure]
This operation does not delete scenes, but returns the contents of scene memory to an initial value.
Step 1. Click the Scene Number selection button to display scene number group 1 - 16 or 17 - 32.
Step 2. Check the scene number to be deleted. Two or more scene numbers can be selected.
Step 3. Click the "DELETE" button in the Scene Memory Operation button.
Step 4. The deleted scene memory reverts to its default setting.
[Selecting the initial scene number to be started when power is switched ON]
Step 1. Click the Scene Number selection button to display scene number group 1 - 16 or 17 - 32.
Step 2. To always start with a fixed scene number, check the desired scene number.
To use the scene number that was selected just before the power was switched OFF, check "LAST."