TriangleTube Prestige Excellence Part 1 - Manual (Page 52)

45
Start-Up Procedures
Display Digit
Segments
Information Mode Items
Accessing Boiler Information
Information mode
To switch from STANDBY mode to INFOR-
MATION mode, press MODE twice.
Press STEP until the system displays the infor-
mation you need. The point located behind the
first position flashes to indicate that the boiler
is in INFO mode.
The ignition counters and burner hours
are split into three two digit numbers.
For example:
Write the numbers down from left to right
to arrive at 123,456 CH ignitions.
In the INFO Mode a temperature read-
ing of -22 typically indicates an “open”
circuit. A temperature reading of 240
typically indicates a short-circuit.
NFO I
NOTICE
NOTICE
ARA P
MODE
NFO I
MODE
Key: Display
Pressing MODE once
Pressing MODE twice
J 12
.34
.56