VACUUBRAND BVC professional G - Manual (Page 22)

page 22 of 68
Operation BVC control / BVC control G
Do not press the keys. Only touch the keys of the touch panel.
The keys “+“ and “-“ have to be touched > 0.25 seconds to be actuated.
A successful action is confirmed by a blip and the flashing of LEDs.
Use the keys to set suction power of the system.
The suction power can be set linearly in a range from 150 mbar (1
LED flashes) to 850 mbar (8 LEDs flash) underpressure (relative to
atmospheric pressure).
+
-
From higher software versions
A flashing LED indicates that the actual avail-
able suction power differs from the preset suc-
tion power.
Attention: If the collection bottle is under vacu-
um and the vacuum demand is reduced, the ex-
isting underpressure inside the bottle remains
until the vacuum is reduced (pressure rises) by
further aspiration with the VHC pro .
2
1 3
Position Designation
1 Key to reduce suction power
2 Display suction power
3
Key to increase suction
power