VACUUBRAND PC 8 m. RC 6 User Manual
Page 2
Dear customer,
Your VACUUBRAND pumping units are designed to provide you with
many years of trouble-free service with optimal performance. Our many
years of practical experience allow us to provide a wealth of application
and safety information. Please read these instructions for use before the
initial operation of your pumping unit.
VACUUBRAND pumps combine our many years of experience in design,
construction and practical operation, with the latest developments in ma-
terial and manufacturing technology.
Our quality maxim is the ”zero defect” principle:
Every vacuum pump, before leaving our factory, is tested intensively, in-
cluding an endurance run (18 hours for diaphragm pumps, 60 hours in
case of the HYBRID-pump RC 6). Any faults, even those which occur
rarely, are identified and can be eliminated immediately.
After completion of the endurance run, every pump is tested, and must
achieve specifications before shipment.
We are committed to providing our customers only pumps that meet this
high quality standard.
While our pumps cannot eliminate all of your work, we design, manufac-
ture and test them to ensure that they will be an effective and trouble-free
tool to assist you in that work.
Yours
VACUUBRAND GMBH + CO KG
After sales service:
Contact your local dealer or call +49 9342 808-5500.
Trademark index:
VACUU•LAN
®
(US-Reg.No 3,704,401), VACUU•BUS
TM
, VACUU•CONTROL
TM
,
chemistry-HYBRID
TM
, Peltronic
TM
, TURBO•MODE
TM
, VARIO
®
(US-Reg.No
3,833,788), VARIO-SP
TM
, VACUUBRAND
®
(US-Reg.No 3,733,388) and also
the shown company logos are trademarks of VACUUBRAND GMBH +
CO KG in Germany and/or other countries.