Casio IT-2000W - Manual (Page 129)

129
DCB structure
typedef struct tagDCB /* DCB */
{
BYTE Id; /* internal device ID */
UNIT BaudRate; /* Baud rate */
BYTE ByteSize; /* Number of bits per byte (4-8) */
BYTE Parity; /* 0 = None, 1 = Odd, 2 = Even, 3 = Mark, 4 = Space */
BYTE StopBits; /* 0 = 1 bit, 1 = 1.5 bits, 2 = 2 bits */
UNIT RlsTimeout; /* Timeout of RLSD set */
UNIT CtsTimeout; /* Timeout of CTS set */
UNIT DsrTimeout; /* Timeout of DSR set */
UNIT fBinary; /* Binary mode (without EOF check) */
UNIT fRtsDisable; /* Ignores RTS at initialization. */
UNIT fParity; /* Enables the parity check. */
UNIT fOutxCtsFlow; /* CTS handshake at output */
UNIT fOutxDsrFlow; /* DSR handshake at output */
UNIT fDummy;
UNIT fDtrDisable; /* Ignores DTR at initialization. */
UNIT fOutX; /* Enables XON/XOFF at output. */
UNIT fnInX; /* Enables XON/XOFF at input. */
UNIT fPeChar; /* Execute replacement because of a parity error. */
UNIT fNull; /* Enables Null stripping. */
UNIT fChEvt; /* Enables the transmission character event. */
UNIT fDtrflow; /* DTR handshake at input */
UNIT fRtsflow; /* RTS handshake at input */
UNIT fDummy2; /* Reserved */
char XonChar; /* XON character for transmission and reception */
char XoffChar; /* XOFF character for transmission and reception */
UNIT XonLim; /* XON threshold at transmission */
UNIT XoffLim; /* XOFF threshold at transmission */
char PeChar; /* Replacement character to be used at parity error */
char EofChar; /* Delimiter of the input characters */
char EvtChar; /* Received event character */
UNIT TxDelay; /* Delay time between characters */
} DCB;