Casio IT-2000W - Manual (Page 151)

151
Installation work :

In the slot, insert the ATA card that has been created for installation and lock the card
lock switch.

If the terminal power is currently on, turn it off. Then press the RESET switch to initiate
the System Menu. Turn the Power switch to OFF and then to ON. The card boot process
will take place.

If the batch files called from AUTOEXEC.BAT have been successfully executed,
installation of the application has been completed.
(2) Installation from a PC
This method is used to directly transfer the appropriate files from the PC to the IT-2000 using the
serial cable or I/O Box. For information about this method of file transfer from the PC refer to
Chapter 3.10 " YMODEM Utility", or Chapter 3.11 "FLINK Command".
(3) Copying application program onto another IT-2000
This method is used to mirror-copy the entire contents of the F-ROM drive of one IT-2000 to
another IT-2000. If an application has been installed on one IT-2000 the application can be installed
on another IT-2000. No accessories, such as a card or cable, are required. For more information
refer to Chapter 3.11 "FLINK Command".