Casio IT-2000W - Manual (Page 241)

241

int DoFlink(int argc, char** argv)
This executes the FLINK protocol and various processes.
SYMTAX
int DoFlink(int argc, char** argv)
INPUT
argc = Number of input parameters
argv = Pointer to the parameter array
OUTPUT:
0 Normal termination
Example
This is an example of transmitting the "C:

test
temp.c" file of my HT so that it
overwrites the "C:

check
" directory on the partner side using the DoFlink
function.
/* Code in C++ */
int argc+4;
char* argv[4] = { "fl", "/so", "c:



test



temp.c", "c:



check



" }
result = DoFlink (argc, argv);
 short DoFLinkForVB(short iArgc, HAD sArgv)
The DoFLink function can be called from either C language or Visual BASIC Version 4 or later .
If Visual BASIC Version 3 is the application development language, use this function instead of
the DoFLink function. Since DLL is usually developed in C, it cannot read the Visual BASIC
data. With Visual BASIC Ver.4.0 or later DLL is automatically converted to a readable form,
however, this function is not implemented in Visual BASIC Ver.3 or earlier. This library (DLL)
provides a solution for using the dedicated Visual BASIC function. This function can of course
also be called from Visual BASIC Ver.4.0 or later.
SYNTAX
short DoFLinkForVB(short iArgc, HAD sArgv)
INPUT
iArgc = Number of input parameters
sArgv = Pointer to the parameter array
OUTPUT
0 = Normal termination