Casio IT-2000W - Manual (Page 285)

285
Operation at Menu Startup
WINST.EXE can run either on the IT-2000 or on a personal computer. However, since the IT-2000
is not provided with an arrow key to move the bar-type cursor, use the following key operations.
IT-2000 PC
Move cursor up "8" "8" or Up arrow
Move cursor down "2" "2" or Down arrow
Accept ENTER ENTER
Cancel CLR ESC
Outline of WINST.EXE Operations
Basically, WINST.EXE will perform the following tasks. Not all of the tasks are always executed
but information about each task is specified by WINST.INF.
 Copies a file in E:WINDOWS
LOCAL to D:
WINDOWS.
 Correct the contents of the Sytem.INI or Win.INI file according to the language, country code,
and keyboard type to be used.
 Copies the drivers to be used and registers them in SYSTEM.INI and WIN.INI.
 Copies the libraries (DLL/VBX) to be used.
The target directory of installation in the above described processes differs depending on the
execution environment of WINST.EXE. For example, if WINST.EXE is executed on the IT-2000,
SYSTEM.INI, which is to be modified, must be in the D:

WINDOWS directory. However, if
WINST.EXE is executed on a personal computer, the SYSTEM.INI file in the WINDOWS directory
under the current directory will be modified.
The following table shows the difference of the processed contents depending on whether
WINST.EXE was executed on the IT-2000 or on the personal computer.
IT-2000 PC
WINST.INF to be used Same directory as WINST.EXE
Target of installation D:

WINDOWS WINDOWS under current
directory
Copying of LOCAL
directory From E:

WINDOWS
LOCAL
To D:

WINDOWS
Not copied
Copy source of drivers Same directory as WINST.EXE
INI file to be modified D:

WINDOWS
SYSTEM.INI
D:

WINDOWS
WIN.INI

WINDOWS
SYSTEM.IN

WINDOWS
WIN.INI