Casio IT-2000W - Manual (Page 289)

289
MD G:


WINDOWS
COPY E:


WINDOWS


LOCAL G:


WINDOWS
If the IrDA interface is used to load COMM.DRV with the following procedure.
COPY E:


WINDOWS


COMM.DRV G:


COMM.DRV must be stored in the same directory as WINST.EXE. Therefore, in the above
example it is loaded onto the root directory.
 Copy the loaded files onto an appropriate directory in the personal computer.
CD C:


IT-2000


INSTALL
MD WINDOWS
COPY D:


WINDOWS


*.* WINDOWS
Load the above mentioned COMM.DRV if using the IrDA interface.
COPY D:


COMM.DRV
 Now that the objective installation files, such as WINST.EXE and WINST.INF, have been
prepared in the INSTALL directory it is time to initiate WINST.EXE. The directory
configuration at this point in time is as follows:
Fig. 9.5
 Execute WINST.EXE to implement the installation.
 Use a device such as a PC card to copy the installed WINDOWS directory onto the drive D of
the IT-2000.
C:

IT-2000

WINST.EXE
WINST.INF
COMM.DRV
SYSCALL.DL
WINDOWS


SYSTEM.INI
WIN.INI
.....
As required