Casio IT-2000W - Manual (Page 95)

95
7. Drivers
7.1 Overview
The following drivers are supplied for this terminal. Install them as required for operation.
Driver File name Purpose
System driver SYSDRV.SYS Driver required to operate the system. This driver
must be installed.
Clock control driver TIME.SYS Executes the process that restores the clock
condition at a resume-boot in cooperation with
POWER.EXE. This driver must be installed.
Hardware window
manager HWWMAN.EXE Driver that controls the hardware window. It is
called from the keypad driver.
Keypad driver KEYPAD.EXE Driver that adds the keypad function to the system.
This driver is called from applications via the
keypad library.
PenMouse driver PENMOUSE.DRV Driver to simulate the Microsoft mouse driver
operation on the touch panel.
Virtual keyboard
driver VKD.386 Driver that enables access to the keyboard
controller. It is installed automatically by the
installer.
System library SYSCALL.DLL This library can be called by application program
or utility which use the library.
Display driver VGA_C.DRV
VGA_NC.DRV Display driver for Windows that can meet the size
of display, 192 x 384 dots. Two types of the
display driver are available, one to display mouse
cursor and the other not to display the cursor. It is
installed automatically by the installer.
For information about the drivers associated with MS-DOS refer to the MS-DOS reference manual
or other technical reference documents published separately by third party.