Ram Trucks 2015 ProMaster Commercial - Owner Manual - Manual (Page 157)

Audio Button: Activates audio setting functions.
Preset Buttons (1 To 6): Store station in memory, access
preset stations.
Buttons 1 And 2:
Forward/reverse folder.
Band/AS Button: Select tuned frequency band, preset
best stations.
Menu Button:
Access setup menu.
General Functions And Settings
Turn The Radio On Or Off
To turn the radio on or off, push the ROTARY knob (push
once to turn on and hold for about three seconds to turn
off), not dependent on the ignition position.
The default radio configuration is “Auto Switch ONЉ (see
SETUP MENU section). In this configuration, the radio
will follow two parameters: ignition and previous state.
If the ignition is turned off with the radio on, the radio
will be turned off, but will come on again when the
ignition is turned on. If the ignition is turned off with the
radio off, the radio continues to be turned off when the
ignition is turned on again.
If you prefer, you can set ЉAuto Switch OFFЉ (see SETUP
MENU section). The radio will only consider the ignition
switch position when it executes the 60 min function:
when the ignition is turned off, the radio will display the
message Љ60 MINЉ for three seconds and switch off
automatically after 60 minutes if no buttons are pushed.
When it is turned on, the radio will display a greeting
message. When it is turned off, the radio will display the
message ЉGOOD BYEЉ before it switches off.
Audio
You can use the AUDIO button to access the available
audio settings (described in the sections below).
4
UNDERSTANDING YOUR INSTRUMENT PANEL 155