Engine oil, Checking oil level – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 338

Advertising
background image

CAUTION!

(Continued)

Your vehicle has been built with improved fluids

that protect the performance and durability of your
vehicle and also allow extended maintenance inter-
vals. Do not use chemical flushes in these compo-
nents as the chemicals can damage your engine,
transmission, power steering or air conditioning.
Such damage is not covered by the New Vehicle
Limited Warranty. If a flush is needed because of
component malfunction, use only the specified
fluid for the flushing procedure.

Engine Oil

Checking Oil Level
To assure proper engine lubrication, the engine oil must

be maintained at the correct level. Check the oil level at

regular intervals, such as every fuel stop. The best time to

check the engine oil level is about five minutes after a

fully warmed engine is shut OFF.
Checking the oil while the vehicle is on level ground will

improve the accuracy of the oil level readings. Maintain the

oil level between the MIN and MAX markings on the

dipstick. Adding one quart of oil when the reading is at the

MIN mark will result in a MAX reading on these engines.

CAUTION!

Overfilling or underfilling will cause oil aeration, or
loss of oil pressure. This could damage your engine.

336 MAINTAINING YOUR VEHICLE

Advertising