Engine break-in recommendations – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 66

Advertising
background image

ENGINE BREAK-IN RECOMMENDATIONS
A long break-in period is not required for the engine and

drivetrain (transmission and axle) in your vehicle.
Drive moderately during the first 300 miles (500 km).

After the initial 60 miles (100 km), speeds up to 50 or

55 mph (80 or 90 km/h) are desirable.
While cruising, brief full-throttle acceleration within the

limits of local traffic laws contributes to a good break-in.

Wide-open throttle acceleration in low gear can be detri-

mental and should be avoided.
The engine oil installed in the engine at the factory is a

high-quality energy conserving type lubricant. Oil changes

should be consistent with anticipated climate conditions

under which vehicle operations will occur. For the recom-

mended viscosity and quality grades, refer to “Mainte-

nance Procedures” in “Maintaining Your Vehicle.”

CAUTION!

Never use Non-Detergent Oil or Straight Mineral Oil
in the engine or damage may result.

NOTE:

A new engine may consume some oil during its

first few thousand miles (kilometers) of operation. This

should be considered a normal part of the break-in and

not interpreted as a problem.

64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising