Electronic stability control (esc) – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 231

Advertising
background image

Electronic Stability Control (ESC)
The Electronic Stability Control (ESC) enhances direc-

tional control and stability of the vehicle under various

driving conditions. ESC corrects for over/under steering

of the vehicle by applying the brake of the appropriate

wheel to assist in counteracting the over/under steer

condition. Engine power may also be reduced to help the

vehicle maintain the desired path.
ESC uses sensors in the vehicle to determine the vehicle

path intended by the driver and compares it to the actual

path of the vehicle. When the actual path does not match

the intended path, ESC applies the brake of the appro-

priate wheel to assist in counteracting the oversteer or

understeer condition.

• Oversteer - when the vehicle is turning more than

appropriate for the steering wheel position.

• Understeer - when the vehicle is turning less than

appropriate for the steering wheel position.

WARNING!

The Electronic Stability Control System (ESC) cannot
prevent the natural laws of physics from acting on
the vehicle, nor can it increase the traction afforded
by prevailing road conditions. ESC cannot prevent
all accidents, including those resulting from exces-
sive speed in turns, driving on very slippery surfaces,
or hydroplaning. ESC also cannot prevent accidents
resulting from loss of vehicle control due to inappro-
priate driver input for the conditions. Only a safe,
attentive, and skillful driver can prevent accidents.
The capabilities of an ESC equipped vehicle must
never be exploited in a reckless or dangerous manner
which could jeopardize the user’s safety or the safety
of others.

5

STARTING AND OPERATING 229

Advertising