Starting procedures, Automatic transmission — if equipped, Normal starting – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 205

Advertising
background image

STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust both

inside and outside mirrors, and fasten your seat belts.

WARNING!

Never leave children alone in a vehicle, or with

access to an unlocked vehicle.

Allowing children to be in a vehicle unattended is

dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Chil-
dren should be warned not to touch the parking
brake, brake pedal or the shift lever.

Do not leave the Key Fob in or near the vehicle (or

in a location accessible to children). A child could
operate power windows, other controls, or move
the vehicle.

Automatic Transmission — If Equipped
The shift lever must be in the PARK or NEUTRAL

position before you can start the engine. Depress the

brake pedal before shifting to any driving gear.
NOTE:

You must press the brake pedal before shifting

out of PARK.
Normal Starting

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the

accelerator pedal.
Turn the ignition switch to the AVV/ACC (START)

position and release it when the engine starts. If the

engine fails to start within 10 seconds, turn the ignition

switch to the STOP (OFF/LOCK) position, wait 10 to 15

seconds, then repeat the “Normal Starting” procedure.

5

STARTING AND OPERATING 203

Advertising