Wheel covers, Jump-starting procedures – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 320

Advertising
background image

11. Stow the jack, jack handle and winch handle tools

back in the storage compartment.

12. Check the spare tire pressure as soon as possible.

Correct the tire pressure, as required.

Wheel Covers

CAUTION!

Use a back-and-forth motion to remove the hub cap.
Do not use a twisting motion when removing the hub
cap, damage to the hub cap finish may occur.

The wheel covers on the vehicle are held in place by the

wheel lug bolts and can be removed after the wheel lug

bolts are taken off.

JUMP-STARTING PROCEDURES
If your vehicle has a discharged battery it can be jump-

started using a set of jumper cables and a battery in

another vehicle or by using a portable battery booster

pack. Jump-starting can be dangerous if done improperly

so please follow the procedures in this section carefully.
NOTE:

When using a portable battery booster pack

follow the manufacturer’s operating instructions and

precautions.

CAUTION!

Do not use a portable battery booster pack or any
other booster source with a system voltage greater
than 12 Volts or damage to the battery, starter motor,
alternator or electrical system may occur.

318 WHAT TO DO IN EMERGENCIES

Advertising